0.00 грн.
Checkout
THC-101 is a temperature and humidity controller with an external sensor. When the ambient temperature is under the set threshold temperature value the Relay-2 will be triggered. When the ambient relative humidity is under the set threshold relative ..
Request a price
THC-102 is a temperature and humidity controller. When the ambient temperature is under the set threshold temperature value or the ambient relative humidity is over the set threshold value, the output relay is triggered. A heating resistance connecte..
Request a price
THC-202 is a temperature and humidity controller. It consists of two displays and an output relay. When the ambient temperature is under the set threshold temperature value or the ambient relative humidity is over the set threshold value, the output ..
Request a price
THC-303 is a temperature and humidity controller device. The THC-303 has a 7-Segment Display, six LED indicators, three sensor inputs and four relay outputs. Output relays have a total of 16 functions and these functions can be adjusted by the displa..
Request a price
Popular
Porcelain bushing insulator IP-10/1000-7.5 U3 (internal installation) with a square flange is used for the following purposes:- complete sets of KTP of internal installation, for 6 and 10 kV - with a power of up to 10,000 kVA;- for input of a high vo..
Request a price
Popular
Transformers of the TMGF type are power oil transformers, flanged, step-down, three-phase, two-winding and sealed. Power from 630 to 2500 kV·A and voltage up to 10 kV are intended for transformer substations of internal and external installation.Spec..
Request a price
The TMTO-80/0.38-U1 transformer is designed for heat treatment of concrete and soil, powering hand-held power tools, and temporary lighting.SpecificationsTMTO-80/0.38-U1 three-phase transformers are produced with a nominal voltage of the primary wind..
Request a price
Popular
TMZ power oil transformers are step-down three-phase two-winding, sealed transformers with oil protection, power from 630 to 2500 kV·A and voltage up to 10 kV, which are mainly intended for transformer substations of internal and external installatio..
Request a price
Transformers of the TMZh type are power oil, step-down, three-phase, two-winding transformers with a capacity from 25 to 2500 kV·A, intended for powering electrical equipment of railways electrified on alternating current.Specifications:TMZH power tr..
Request a price
Popular
Transformers three-phase, power, dry, with forced cooling of the TS(Z)HO series with windings made of conductors with "NOMEX" insulation of heat resistance class "H" (180 °С), two-winding, general purpose power from 250 to 1600 kV•A voltage up to 10 ..
Request a price
Popular
A vacuum circuit breaker is an electromechanical device that is used to switch electrical circuits at high voltage. The medium for extinguishing the arc is vacuum. Designed for use at substations as part of switchgear cells 6(10)–35 kV. The device of..
Request a price
The voltage transformer type VTB 30-F1 is a primary internal contact for a fuse made by contact with a holder on the voltage transformer. In this regard, this transformer has a "telescopic" shape.The transformer itself has a single-phase cast structu..
Request a price
Popular
The voltage transformer type VTB-40 is a single-phase cast structure in the form of an inductive type converter, with one isolated terminal of the primary winding, the other end of the primary winding is grounded during operation.The primary winding,..
Request a price
Popular
The voltage transformer type VTH 52-N is a single-phase cast structure in the form of an inductive type converter, with one isolated output of the primary winding, the other end of the primary winding is grounded during operation.The primary winding,..
Request a price
Surge arrester OPN-0.22 is designed to protect networks with a voltage class of 0.22 kV from lightning and switching surges.SpecificationsMains voltage class, effective value, kV - 0.22;The highest long-term permissible operating voltage (Unr), effec..
280.80 грн.
Popular
The arrester RVN-0.5 U1 is designed to protect against atmospheric overvoltage insulation of AC electrical equipment with a frequency of 50 and 60 Hz. Manufactured for networks with any neutral earthing system.Specifications:Mains voltage class, kV e..
298.80 грн.
Popular
Surge arrester OPN-0.38 is designed to protect electrical equipment of switchgears from atmospheric and switching overvoltages in electrical networks with a voltage of 0.4 kV AC, frequency 48 - 62 Hz with isolated or compensated neutral.Specification..
309.60 грн.
Popular
The RVO-6 U1 arrester is designed to protect against atmospheric surges in the insulation of AC electrical equipment with a frequency of 50 and 60 Hz. Overvoltages are any kind of voltage increase that poses a threat to the integrity of the insulatio..
802.80 грн.
Popular
The RVO-10 U1 arresters are designed to protect against atmospheric overvoltage insulation of AC electrical equipment with a frequency of 50 and 60 Hz. They are made for networks with any neutral earthing system.Specifications:Mains voltage class, ef..
1 004.40 грн.
Popular
Surge arrester OPN-6 is designed to protect the electrical equipment of switchgears from atmospheric and switching surges in electrical networks with a voltage of 6 kV AC, frequency 48 - 62 Hz with isolated or compensated neutral.SPECIFICATIONSMains ..
1 112.40 грн.
Popular
Surge arrester OPN-10 with polymer insulation (OPNp-10). The advantages of polymer insulation over porcelain include: - significantly smaller weight and overall characteristics; - simplification of installation; - explosion safety;&..
1 245.60 грн.
Current transformers of the TZL-B type are manufactured for installation in complete distribution devices and are used for signal transmission of measuring information of protection, automation and control devices in alternating current installations..
1 560.00 грн.
Current transformer TShL-V-0.72 (TNSHL-0.66) is a low-voltage, busbar, single-winding (with one secondary winding) transformer in an epoxy compound case. It consists of a secondary winding wound on a magnetic core made of electrical steel. The primar..
3 360.00 грн.
Current transformers of the TZRL-B type are made for installation in complete distribution devices and are used for signal transmission of measurement information of protection, automation and control devices in alternating current installations for ..
4 560.00 грн.
Power equipment, the main purpose of which is the use in industry, because it is designed for large capacities and can withstand heavy loads, which usually do not happen in everyday life. Power equipment includes power transformers (oil and dry), switching devices, devices for protecting power networks, etc.
