Current transformer TZL-V up to 0.72 kV

Current transformers of the TZL-B type are manufactured for installation in complete distribution devices and are used for signal transmission of measuring information of protection, automation and control devices in alternating current installations for a voltage class of up to 0.72 kV with a frequency of 50 Hz. They can also be used in high-voltage cable or bus lines (3-110 kV), provided that the main insulation between the current-conducting cores of the cable (bus) and the secondary winding of the transformers is provided by the insulation of the cable. The transformers are made for indoor installation and correspond to the type of climatic performance U and placement category 2 according to GOST 15150. According to DSTU IEC 60044-1, the category of transformers according to the temperature of the atmospheric air is "-40/40".

Characteristics of the TZL-B transformer:

Correspondence of installation and connection dimensions with previous transformers of other manufacturers.

The possibility of installing the transformer in any position in space.

Absence of air sinks inside the compound.

The accuracy class of the transformer does not change during the service life.

Convenience and ease of installation of the transformer.

The possibility of sealing the secondary terminals of the transformer.

Insulation based on an epoxy compound provides high electrical strength, insulating and physical-mechanical properties of the product, being at the same time its supporting structure, completely seals the transformer, also increases the reliability of the product and reduces to a minimum the amount of preventive work during its operation, while reducing weight and dimensions . the product itself. The construction with insulation from an epoxy compound ensures high fire and environmental safety.

The main technical indicators of the TZL-B current transformer:

  - The highest operating voltage of the equipment: 0.72 kV

  - Nominal frequency: 50 Hz

  - Diameter of the inner hole: 70, 102, 206 mm

  - Number of secondary windings: 1, 2

  - Transformation factor: 25, 30, 60

  - Nominal primary current: 25, 30, 60A

  - Maximum primary current: 50, 60A

  - Nominal current strength of the secondary winding: 1A

  - Nominal load of the secondary winding at cos = 1: 1Ω

Sensitivity:

  - on P1-P2 at nominal load and primary current of 0.25A at least: 4, 8, 10 mV

  - One-second thermal resistance current of the secondary winding: 140A

  - Test one-minute insulation voltage: 3kV

Weight: 3, 5, 10 kg

They meet the standards of DSTU IEC 60044-1: 2008, the initial inspection is carried out in accordance with DSTU 6097:2009.

We deliver orders throughout Ukraine, except temporarily occupied territories and war zones. Delivery is carried out by transport and logistics companies chosen by you.

The terms of delivery of the order depend on the availability of goods in the warehouse. If at the time of placing the order, all the selected goods are available, then we will deliver the order within a few days, depending on the remoteness of your region. If the ordered product is not in stock, the maximum delivery time of the order may be several weeks. But we try to deliver orders to customers as quickly as possible, and 90% of customer orders are shipped within the first almost immediately. In the event that part of the goods from your order did not arrive at the warehouse after the specified period during the discussion with the manager, we will definitely inform you about it.

Payment methods:

• Payment upon receipt
• Online card payment
• Non-cash settlement