0.00 грн.
Checkout- Product Code: THC-102
- Availability: In Stock
We accept payment online
Same day when ordering before 16:00
All products are certified
- Product overview
- Information
- Reviews (0)
THC-102 is a temperature and humidity controller. When the ambient temperature is under the set threshold temperature value or the ambient relative humidity is over the set threshold value, the output relay is triggered. A heating resistance connected to the output relay can be energized and controlled to increase the ambient temperature and decrease the relative humidity.
Features
THC-102 is designed to control temperature and humidity by means of a heating resistance in order to prevent high humidity or low temperature levels. Device is equipped with two analog inputs to set threshold values and a relay output. Its relay is programmed to be activated where ambient temperature is less than set temperature or ambient relative humidity is higher than its set value.
If it is cold or there is high relative humidity, device will activate heating resistance by means of its relay and temperature will increase also relative humidity will decrease related with temperature. LED indicators are placed upper part of the device to show status of Vaux and Rout. Relay switches Vaux directly to Rout, so it is important to be aware that the heating resistance should be connected directly to the device, and there is always line voltage at Rout when the relay is ON.
The relay can be used for activating a heating resister to increase the ambient temperature or active a led or a buzzer to alarm the personnel. In case the sensor is not connected to the device or there is a connection error, the LED indicators flash periodically.
There are no reviews for this product.
No questions about this product, be the first and ask your question.
