0
0

0.00 грн.

Checkout

Complete transformer substation for city networks (2KTPGS)

Reviews:
(0)
  • Brand: Україна
  • Product Code: 2ктпгс
  • Availability: In Stock
Payment

We accept payment online

Delivery Information

Same day when ordering before 16:00

Quality guarantee

All products are certified

  • Product overview
  • Information
  • Reviews (0)
  • Questions (0)

Complete transformer substations of external installation of pass-through and dead-end type at a voltage of up to 10/35 kV, and with a capacity of 160, 250, 400, 630 and 1000 kVA are designed for receiving, converting and distributing electrical energy of three-phase alternating current with a frequency of 50 Hz at a nominal -two radial and loop schemes of power supply of urban and agricultural facilities, as well as construction sites in areas with a moderate climate (from -45 to +45 C).

2KTPGS are produced in a frame-type metal structure, with power transformers, cameras on the high (HV) and low voltage (LV) sides, a street lighting panel, a meter block installed in it, and replace substations assembled at the installation site from SWR cameras, which delivered separately, ShCHO-90 panels and other products.

Structurally, 2KTPGS consists of 4-6 blocks of high factory readiness, due to which installation and assembly at the facility takes from 4 to 8 hours. In high-voltage cabinets, load switches of the VNA type with a spring drive or disconnectors of the RVZ type are installed. Circuit breakers with fuses or automatic switches are installed in the PN cabinet, there is a general electricity meter and street lighting meter. Input from the high side - air or cable, PN conclusions - cable. KTPGS are mounted on the foundation. Type of climatic performance U1 according to GOST 15150-69.

Normal operation of 2KTPGS is ensured under the following conditions:

- installation height above sea level no more than 1000 m;

- ambient air temperature from minus 60 ° C to plus 40 ° C;

- average daily relative humidity up to 80% at plus 15 °C;

- absence of conductive dust, chemically active gases and vapors in the environment;

- 2KTPGS is not intended for work in explosive areas. Complete transformer substations comply with: TU U 31.2-327-29641-002:2010

Reviews (0)

There are no reviews for this product.

Questions (0)

No questions about this product, be the first and ask your question.

Through-pass porcelain insulators 10 kV
Pass-through porcelain insulators (for internal installation) with a built-in aluminum busbar!
More
Through-pass porcelain insulators 10 kV